Reasons for Excessive Temperature During Plastic Bucket Manufacturing
Release Time:
2020-03-04
Plastic bucket The volume is too small, the heat dissipation area is insufficient, and the cooling device has too small a capacity. High temperatures in the climate and working environment cause the oil temperature to rise, affecting the oil's viscosity. Improper selection of viscosity and viscous resistance can lead to increased viscosity and insufficient leakage, which may cause heating temperature issues in two cases.
Plastic bucket The system pipeline is too thin and too long, causing local pressure loss and significant pressure loss along the route. Lack of precision components and poor assembly quality lead to mechanical friction losses between relative movements. If the clearance fit is too small or wear after use is too large, it causes large internal and external leakage, resulting in significant volumetric losses such as reduced volumetric efficiency of the pump and faster temperature rise.
Plastic bucket The capacity of the oil pump is selected according to the fast feed speed quantitative pump supply system, which will have excess heat flow and overflow from the safety valve under high pressure during operation. All flow system unloading circuits, due to faults or when unloading circuits stop, do not set the pump to unload. At high pressure, pump overflow causes flooding heat loss and temperature rise.
Some people use plastic buckets for diesel for convenience in drawing, gas stations, and petroleum workers. Regardless of the danger, they directly load diesel into plastic buckets, which is extremely dangerous. What are the reasons for diesel burning or exploding in plastic buckets? Let the Shandong plastic bucket manufacturer introduce them to us.
1. In Plastic bucket adding diesel will increase the acidity of diesel, and after placing it in a plastic bucket for 7 days, the acidity of diesel will continue to increase. The increase in acidity accelerates the corrosion of precision components in the diesel supply system.
2. Diesel left standing in a plastic bucket for three days shows an increase of more than 10% in resin content compared to the original, and after 9 days of storage, it increases by more than 30%. Therefore, carbon deposits, films, and sludge continuously form in the diesel engine, affecting the normal operation of the engine.
3. Residual carbon in diesel will increase. After storing in a plastic bucket for several days, the content of residual carbon will increase by more than double, seriously affecting the quality of diesel fuel. The iron bucket used for storage should be rust-free and flake-free, cleaned and coated with varnish, epoxy resin, or galvanized to ensure oil quality.
4. The distillation range of diesel fuel will be significantly longer. Plastic bucket Storing diesel will extend its distillation range, affecting the starting performance and working balance of the diesel engine, causing incomplete combustion of diesel, forming carbon deposits, and increasing fuel consumption.
Keywords:
Shandong Plastic Barrel Manufacturer, Plastic Square Barrel, High-Quality Plastic Barrel Manufacturer
Related News
Powered by:300.cn | SEO | Privacy Policy